Types of Bodies
On this page
Australian Government bodies are diverse, which means classification is not always straightforward. The following table provides guidance on the main types of Australian Government bodies included on the Australian Government Organisations Register (AGOR). Bodies may possess some, but not all, of the features listed. Where a government body could be classified under more than one body type, the most relevant classification should be chosen.
Please note that updates were made in July 2024 to align the AGOR Types of Bodies with the governance structures outlined by the Commonwealth Governance Structures Policy. For further information and questions relating to these changes or feedback on the following guidance, please contact OAR@finance.gov.au.
Scope of AGOR
Link copiedThere are 13 main types of bodies which are listed on AGOR, separated into 4 broad classifications:
- Primary bodies
- A. Non-corporate Commonwealth entity
- B. Corporate Commonwealth entity
- C. Commonwealth company
- Secondary statutory structures
- D. Statutory advisory structure
- E. Statutory office holder, offices and committees
- Secondary non-statutory structures
- F. Non-statutory advisory structure
- G. Non-statutory function with separate branding
- Other governance relationships
- H. Ministerial Councils and related bodies
- I. National law bodies
- J. Inter-jurisdictional and international bodies
- K. Structures linked to the Australian Government through statutory contracts, agreements and delegations
- L. Joint ventures, partnerships and interests in other companies
- M. Subsidiaries of corporate Commonwealth entities and Commonwealth companies
Portfolios are responsible for collecting and updating information about the bodies listed on AGOR.
Details on bodies excluded from AGOR are included below.
Types of bodies
Link copied| Type of Australian Government Body | Key Characteristics | Examples |
| A: Primary body - Non-Corporate Commonwealth entity |
|
|
| B: Primary body - Corporate Commonwealth entity |
|
|
| C: Primary body - Commonwealth company |
|
|
| D: Secondary statutory structure - Statutory advisory structure* |
|
|
| E: Secondary statutory structure - Statutory office holders, offices and committees | The functions of the office, office holder or committee are recognised in legislation. The head of the office is usually appointed under legislation by Ministers, the Governor-General, or may hold the role ex officio. Can include corporations established under legislation other than the PGPA Act and Corporations Act 2001, such as the Repatriation Commission. Can also include selection committees/panels established under legislation to appoint members to the board/council of a Commonwealth entity. Can form part of a Commonwealth entity, supported by staff from that entity. They do not usually incur expenditure on their own account nor prepare separate accounts. Instead, where expenditure is incurred, it is accounted for through the accounts of a parent body. May employ branding/marketing separate from the parent entity for the purposes of engaging with stakeholders (mostly external). |
|
| F: Secondary non-statutory structure - Non-statutory advisory structure* |
|
|
| G: Secondary non-statutory structure - Non-statutory function with separate branding |
|
|
| H: Other governance relationship - Ministerial Councils and related bodies* |
|
A complete and updated list of Ministerial Councils is maintained by the Department of the Prime Minister and Cabinet at Federation.gov.au. |
| I: Other governance relationship - National law bodies* |
|
|
| J: Other governance relationship - Inter-jurisdictional and international bodies* |
|
|
| K: Other governance relationship - Structures linked to the Australian Government through statutory contracts, agreements and delegations* |
|
|
| L: Other governance relationship - Joint ventures, partnerships and interests in other companies |
|
|
| M: Other governance relationship - Subsidiaries of corporate Commonwealth entities and Commonwealth companies |
|
|
Other information
Link copiedSub-bodies (*)
Sub-bodies of committees, working groups and advisory bodies, etc. are generally listed as separate entries on AGOR where:
- at least half of their memberships are drawn from outside the parent bodies’ membership, and/or
- the sub-body has its own separate terms of reference.
Exclusions
The following types of bodies are generally excluded from AGOR:
- Internal management, advisory and administration bodies (including Commonwealth officials-only working groups and inter-departmental committees). Many of these are time-limited and their primary purpose is to assist departments and other government entities with their internal management, administration, and policy development/co-ordination.
- The High Court of Australia, as it is not a Commonwealth entity due to its status under its enabling legislation.
- Parliamentary Committees, as their creation is controlled by the Parliament rather than the Government.
- Bodies that have been announced by the Government, but which are not yet established or substantially operational.
For queries on the types of bodies captured on AGOR, please email OAR@finance.gov.au.
Inactive Bodies
‘Inactive’ bodies are dormant bodies, which meet for a specific purpose from time-to-time but are not considered to have ceased in the interim. In some instances, they may lay dormant for a prolonged period (years even) until a specific event triggers the members to meet to consider matters in order to provide advice and/or make decisions.
Time Limited Bodies
Some bodies are considered ‘time limited’ where they exist for only a set period. Only bodies that continue in existence for 3 months or longer should be reported on AGOR.
Where the ‘life’ of the body is shorter than 3 months, they should be excluded from reporting except where there is a need to report the appointees to meet Senate Order 15 reporting requirements.
Abolitions and Cessations
A body created through statutory means can only cease once its enabling legislation has been successfully repealed. Even though a decision has been made to abolish the body by the Government, legally it still exists until its underlying authority is repealed.
Subsidiaries of corporate Commonwealth entities and Commonwealth companies can only be abolished once sold (or when the Government's material component is sold) or when they are wound-up and deregistered on ASIC's Organisation and Business Names Register (or another similar register for those bodies registered in an overseas jurisdiction).
In general, for all other bodies, they can only cease when the underlying authority is no longer relevant.
Reporting of Creation Dates
Primary bodies
A Department of State’s or entity’s creation date will always be based on the authority that establishes it, for example:
- A department’s creation date will be based on the date the Administrative Arrangement Order (AAO) was issued. This includes those changes where existing departments are renamed by an AAO.
- For a PGPA Act entity, the creation date will be based on the commencement date as specified by its enabling legislation or through listing in Schedule 1 of the Public Governance, Performance and Accountability Rule 2014.
Where a secondary body is replaced by a department or PGPA Act entity, its creation date will be based on the commencement date as specified by the authority establishing the new department or PGPA Act entity.
Similarly, where a PGPA Act entity is merged into an existing department or entity and continues to exist as a secondary body with an identical name, the creation date will be based on the commencement date establishing the secondary body under the new authority (this could be through legislative or non-statutory means, that is, the date of effect for when the non-statutory function with a separate branding commenced operations).
This approach ensures the creation dates are tied to the relevant authority and overarching governance arrangements.
Secondary structures (statutory and non-statutory) and Other governance relationships
The creation date for secondary structures will usually be based on the authority for when they were established. Sometimes that authority may mean when the Government assumed control of the entity. Some more specific examples are provided below:
- Where they are established by legislative means, their creation date will be based on the commencement provisions as specified by the Act. Usually applies to Secondary statutory structures (Type of Body D and E), National law bodies (Type of Body I) and Structures linked to the Australian Government through statutory contracts, agreements and delegations (Type of Body K) when they are considered to be established by the existence of a statutory contract.
- The creation date of Secondary non-statutory structures (Types of Body F and G) is based on:
- the body’s terms of reference
- a Ministerial announcement proclaiming its commencement
- when it commenced operations
- when it first meets, and/or
- when the first chairman is appointed and has commenced in the role.
- For Ministerial Councils and related bodies (Type of Body H) and Inter-jurisdictional and international bodies (Type of Body J), these would be based on the effective commencement date as specified within the agreement/treaty obligation. For smaller Ministerial Council sub-committees and working groups, their creation date could be determined by referring to their terms of reference where one exists.
- For Subsidiaries of corporate Commonwealth entities and Commonwealth companies (Type of Body M) their creation date should be based on when the Government assumed control of the entity which can vary depending on the circumstances:
- where the Government establishes the subsidiary from the beginning, the creation date will match the registration date reported by ASIC’s Organisations and Business Names Register, or
- where a corporate Commonwealth entity assumes control of an existing subsidiary (that is, purchases an existing entity), the creation date will need to reflect when the controlling interest was assumed to have taken effect, that is, the date for when the shares were transferred to the parent entity.
- For Joint ventures, partnerships and interests in other companies (Type of Body L) their creation date needs to reflect when a controlling interest was assumed to have taken effect.
Where a body existed prior to the 2014-15 financial year and its exact creation date is unknown, but the year in which it was created is, the creation date is to be defaulted to the start of the financial year (that is, 1 July XXXX). Where the month is known, but the exact day is not, then refer to the first day of the month.
The above covers the most common examples for determining a body’s creation date. Where a body exists that is not captured by one of the above examples, the principals of referring to when the underlying authority came into effect and/or when control was assumed continue to apply.